Figure 11: Interface Selection screen.
3. On the Interface Selection screen, select the relevant IP address that is to be
used for communicating with the base station(s).
4. Once the IP address has been selected the Simoco IP Configuration Tool main
screen will be displayed see Figure 12
Figure 12: IP Configuration Tool main screen.
5. Refer to the Simoco IP Configuration Tool User Manual and configure the IP
Address for the relevant MAC Address listed in the data grid of the main screen
in accordance with Todo//Section 2.2 – Configuring an IP Address.
7.6. CONFIGURING THE DMR BASE
7.6.1. Platform and Application Software Update
1. On the PC, open an internet browser and access the Simoco webpage.
2. On the Simoco webpage, select ‘Partner Login’ and login to the Partner Portal
area.
3. When logged in to the Partner Portal, navigate to the ‘Resource Library’ >
‘Software Downloads’ > ‘DMR’ > ‘Simoco Xd Infrastructure’ page and ensure
that you have the latest version of the ‘DMR Tier III’ > ‘DMR Base’ software. If
necessary, download the latest software to the PC.
Doc Number: TNM-I-E-0046 ISSUE 1.2 Page 45
To Next Page
Loading...