10
ASSEMBLY AND OPERATING INSTRUCTIONS – continued
Step 13
Press ON (I) button. If unit does not start initially, turn the switch couple more times to reach the prime.
Surface Preparation
Before starting any cleaning task it is important to inspect the area for objects which could create a
hazard. Remove objects from the work area which could be tripped over, such as toys or outdoor fur-
niture. Ensure that all doors and windows are closed tight.
ON
(
|
)
OFF
(
O
)
Step 11
Make sure the main switch is in “OFF” position.
Plug the unit into proper grounded outlet.
Step 12
Purge air by squeezing trigger until there is a
steady stream of water.
Fig.12
Fig.11
Fig.13
To Next Page
Loading...
