20
TECHNICAL SPECIFICATIONS
Specifications
Pump Pressure: 1300 PSI
Power Source Requirement: 120 V, 15 A, 60 Hz
Electrical cord: 33’
High-pressure hose: 23’
Max. Pressure: 1900 PSI
Water Flow Rate (at 1000 psi): 1.7 GPM (Gallon Per Minute)
Current Drawn: 13 A
Detergent Injection Rate: 0–15%
Inlet water: Cold tap water
Nozzle spray angle (high-pressure): 0–60°
Nozzle spray angle (low-pressure): 0–90°
Turbo Nozzle: 30°
To Next Page
Loading...
