13
Working with detergent ensures a quick soaking
of the dirt, and allows the high-pressure water to
penetrate and remove the dirt more effectively.
Always spray detergent on a dry surface,
do not
pre-soak area. Wetting the surface first dilutes
the detergent and reduces its cleaning ability.
To apply detergents you must be operating at
low-pressure.
This provides a gentle application
of detergent, with the pressure equivalent to a
low-set garden hose. The high-pressure setting
is used for cleaning; you cannot apply detergents
when working at high-pressure. Always test
detergent in an inconspicuous area before use.
WORKING WITH DETERGENTS
Step 1
Install the adjustable wand into spray gun and
twist. Turn until rectangular tab appears.
Step 2
Set the adjustable nozzle to the low-pressure
setting. The nozzle must be set in the low-pres-
sure position to apply detergents.
Fig.18
Fig.20
Fig.19
Caution
Only use cleaning detergents
recommended for this pressure washer.
Step 3
Gently pull detergent containers out of their storage position, and fill with detergent. Push containers
back into their stroage position.
To Next Page
Loading...
