Simplex 2606-9101 Series - Configuring 2250 and 2050 Facus for LCD Annunciator Using PC Tool

5.4 Configuring 2250 and 2050 FACUs for LCD Annunciator using PC tool
To configure the 2250 FACU using the PC tool, complete the following steps:
1. From the console list, select General Options.
2. From the General Options menu, select the Annunciator tab.
3. To configure the Annunciator select the Enable Annunciator checkbox.
Figure 12: The Enable Annunciator checkbox
You can connect a maximum number of eight annunciators to one FACU.
page 16 579-1434 Rev B
Foundation Series 2606-9101 LCD Annunciator Installation Guide