visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
2
Step 1. Install your Base Station
• Set up your Base Station in a central location in your
house. Don’t install it on the floor.
• Plug the Base Station into a power outlet using the
included power cord.
Make sure the power
outlet is not controlled by
a light switch which could
accidentally cut power to
the Base Station
It’s the control center of your system, communicating
with all of your wireless sensors.
It can connect to wifi and has a built in cellular alarm
transmitter that will send us your alarm signals when
you activate your SimpliSafe alarm monitoring service
(see page 14).
For a UL 985 installation, you must always secure the
power adapter to the wall with a bracket. Please contact
SimpliSafe for details.
Helpful Information about your Base Station
Tip:
To Next Page
Loading...
Need help?
General
