visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
9
• Remove the battery activation strip.
• Remove mounting bracket
from the detector by rotating it
counterclockwise.
• Install the bracket on the wall or
ceiling using the included screws and
wall anchors.
Install your Smoke Detectors
Do not install near
your furnace, stove,
fireplace, kitchen or
garage, or bathroom
with a shower.
Make sure to place
Smoke Detectors near
your sleeping areas. For
maximum protection,
place one on each level
of your home.
• Push the Smoke Detector against the mounting bracket
and rotate it clockwise until it snaps into place. Pull gently
on the detector to make sure it’s securely attached.
• This detector is for household use only. There are local
laws that apply to Smoke Detectors. Please refer to the
information included in the detector box and consult with
your local fire department regarding any requirements.
Mounting
Bracket
Tip:
!
Tip:
To Next Page
Loading...
Need help?
General
