Chapter 9-24 CR34/44/54 Setup menu
A-Z
Key in a name for the new palette setup - max. 29 characters,
-refer to “Naming of routes, points, etc.” in section 2.6.
+/-
Toggle between available color settings
ENT
Confirm new setup
9.7 Factory settings
DELETE MEMORY: It will be possible to erase a single category
of objects entered into the unit by the user - for example, if moving
to a different place in the world you may no longer need the routes
etc. you have in the memory. However, an alternative is to store the
data on a DataCard or disc - refer to section 8.9.
FACTORY PR ESETS: If the unit is still ‘alive’ but has ceased to
respond to normal operation, it could become necessary to return to
the factory presets - but first check ‘Troubleshooting’ in section 10.1.
MENU
Call up the menu bar, and...
7,4
activate the display for Factory settings
DELETE MEMORY:
1
Delete all WAYPOINTS
2
Delete all ROUTES
3
Delete all LINES
4
Delete all TRACKS
5
Delete all TARGETS
Used memory: 0%
FACTORY PRESETS:
6
Return to SimNet/NMEA presets
7
Return to CHART presets
8
Return to RADAR presets
CLR
Return to all factory presets
0
Show test display
MENU
Exit
To Next Page
Loading...
Need help?
General
