Simrad GO7 Getting Started

Audio
If a SonicHub server or a FUSION marine entertainment system is
connected to the NMEA 2000 network, you can use the GO7 to
control and customize the audio system on your vessel.
Before you can start using your audio equipment, it must be
installed according to the GO7 Installation manual and to the
documentation included with the audio device.
Enabling audio
A compatible audio device connected to the NMEA 2000 network
should automatically be identified by the system. If not, enable the
feature from the Advanced Settings dialog.
The Audio panel
You activate the audio panel by activating the audio tile in the
Instrument bar.
The control buttons, tools and options vary from one audio source
to another as described later in this chapter.
11
34
Audio | GO7 Getting Started

Simrad GO7 Specifications

General

Resolution	800 x 480 pixels
Touchscreen	Yes
Networking	NMEA 2000
Bluetooth	Yes
Chartplotter	Yes
Display Size	7 inch
GPS Type	Internal
Wireless Connectivity	Wi-Fi
Chart Compatibility	C-MAP, Navionics
Display Type	TFT LCD
SD Card Slots	1
Sonar Compatibility	CHIRP
Radar Compatibility	Yes
Operating Temperature	-15°C to 55°C
Sonar	Broadband, CHIRP, DownScan, SideScan (with compatible transducer)