EasyManua.ls Logo

Simrad HALO 5000 - Page 13

Simrad HALO 5000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE | 13
LED Color Indication Possible cause Action
Status Green Normal operation Output voltage > 45 V. The radar
will operate regardless of any fault
or warning indication.
Green/
orange
fast
ashing
Wrong or no radar connected Output voltage 16 V to 45 V Check output voltage.
Orange Radar is o Output voltage 16 V to 45 V.
Typically the radar is given 30
seconds to prepare for shutdown.
Check the J1
connector. The Park
signal should be
connected to V-.
Replace the RI-50.
Red Radar is o Output voltage <16 V. Typically the
output is o.
Replace the RI-50.
Ethernet OFF RI-50 Ethernet is not used.
Fuse
In the rare event that the non-replaceable fuse blows on your RI-50 circuit board, the BLOWN FUSE LED will light up while
power is supplied to the RI-50. This indicates an internal fault, and you will need to replace your RI-50 unit.
¼ Note: A blown fuse indicates an internal fault with your RI-50. It does not indicate a fault with the external wiring to the
RI-50 or a fault with the radar pedestal.

Other manuals for Simrad HALO 5000

Related product manuals