28 |
Installation | HS60 GPS Compass User Guide
Key-way alignment
2.
Rotate the cable ring clockwise until it is secured firmly to the unit (hand-
tighten).
Powering and connecting to the HS60
Power considerations
For best performance, use clean and continuous power. The HS60
power supply features reverse polarity protection but will not oper-
ate with reverse polarity.
See Power specifications, chapter 5.
Warning: Do not apply a voltage higher than 36 VDC. This will
damage the receiver and void the warranty.
Electrical isolation
The HS60’s power supply is isolated from the communication lines
and the PC-ABS plastic enclosure isolates the electronics mechani-
cally from the vessel (addressing the issue of vessel hull electrolysis).
To Next Page
Loading...
Need help?
General
