Maximum total length of SimNet cables is 150 m 1
(500 ft.)
Drop cables must not exceed 6 m (19 ft) of length 2
and the total length of drop cables must not
exceed 60 m (200 ft).
Equipment should not be daisy-chained in a drop 3
cable.
The wind transducer (*) has a built-in terminator.4
Connecting IS20 to an NMEA2000 network
No daisy-chain connection is permitted between SimNet
units when connected to an NMEA2000 network!
Use the SimNet cable (part no. 24005729) to connect the
IS20 to an NMEA2000 network.
To Next Page
Loading...
