Need help?Do you have a question about the Simrad S3009 and is the answer not in the manual?
General| Display Size | 9 inches |
|---|---|
| Touchscreen | Yes |
| GPS | Yes |
| Chartplotter | Yes |
| Sonar | Yes |
| Waterproof Rating | IPX7 |
| Display Type | LCD |
| NMEA 2000 | Yes |
| NMEA 0183 | Yes |
| Type | Multifunction Display |
| Compatibility | Simrad radar, sonar, and autopilot systems |
| Power Supply | 12/24 V DC |
| Operating Temperature | -15°C to +55°C |
| Storage Temperature | -20°C to +70°C |
| IP Rating | IPX7 |
| Humidity | Up to 95% RH |
| Ethernet Ports | 1 |
| SD Card Slots | 1 |
Identifies and describes the front panel buttons and their functions.
Explains the different areas of the main display panel.
Describes the function and behavior of softkeys.
Explains navigation through menus and dialogs.
Instructions for powering the unit on and off.
How to change screen brightness and color palettes.
Steps to acknowledge and clear system alerts.
How to configure depth reference and alarm limits.
Explains how depth alarms are generated and indicated.
Methods for zooming and panning the echo sounder display.
How to use the cursor to view data and select points.
Using the cursor to measure distances on the display.
How to interpret and navigate the depth history display.
Configuration of depth range modes (manual, auto, custom).
How to adjust display colors and echo sensitivity (gain).
Adjusting color settings for signal representation.
Configuration of advanced display features like frequency and noise rejection.
Adjusting the transducer's transmit rate.
Choosing the active transducer for display.
Configuring dual panel displays and orientation.
How to use split zoom mode to magnify the display.
How to record and save sonar data.
Details on how depth data is logged and stored.
Procedure for exporting logged data.
Classification of system alerts into Alarms and Cautions.
How alerts are displayed, sorted, and their states.
Accessing and understanding the alerts history dialog.
A list of alert text, descriptions, and types.
Installation guidelines and included parts for the control unit.
Step-by-step instructions for mounting using a U-bracket.
Instructions for mounting the unit into a panel.
Considerations for transducer installation location and design.
General rules and warnings for cable installation.
Diagrams illustrating wiring for single transducer systems.
Wiring diagrams for dual transducer setups.
Details on connecting transducers, including extension cables.
Information on using extension cables for transducers.
Wiring diagrams and pinouts for S3009 transducer connections.
Wiring diagrams and pinouts for S5100 transducer connections.
To Next Page