Simrad S3009 - Dual transducer system; Transducer wiring

Dual transducer system
C
B B
A
D
E
F
A S3009 control unit
B TGM50-200-xxL or TGM60-50-xxL transducer
C S5100 sonar module
D NMEA 0183/IEC61162-1
E NMEA 2000/IEC61162-3
F NC isolated alarm circuit
Transducer wiring
The transducers are shipped with a 20 meter long cable. An extension cable can be installed
if a total length of more than 20 meters is required between the transducer and the S3009 or
S5100 module.
For dual transducer installations, an S5100 module has to be installed.
E
D
A
B
C
E
G
F
B
C
A S3009 7-pin transducer cable
B Optional extension cable
C Transducer cable (20 meters)
D Junction, 7-pin transducer cable (A) to transducer cable (C) or optional extension
cable (B)
E Junction (optional), extension cable (B) to transducer cable (C)
F S5100 9-pin transducer cable
G Junction, 9-pin transducer cable (F) to transducer cable (C) or optional extension
cable (B)
Wiring | S3009 Echo Sounder User Manual
27