4. Mount the unit to the bracket using the knobs. Hand tighten only. The ratchet teeth in the
bracket and display case ensure a positive grip and prevent the unit changing from the
desired angle.
5. Fix the bracket straps.
Panel mounting
The screws and gasket used for panel mounting are included in the box.
For mounting instructions, refer to the mounting template.
Transducers
The ideal mounting location for transducers depend on the design of the vessel.
The installation shipyard must ensure sufficient reinforcement and watertightness of the hull,
and must design and manufacture installation hardware that fits the transducer and the
vessel.
For dimensional drawings refer to "Dimensions - TGM60-50-xxL and TGM50-200-xxL transducers" on page
50.
S5100 echosounder module
For S5100 echosounder module mounting information, refer to separate installation
instructions included with the module.
Mounting | S3009 Echo Sounder User Manual
25