|
35
NMEA 2000 / SimNet | NSS Installation Manual
corrected using the Advanced Source Selection. An example of this is where twin installations
with NMEA 2000 compliant engines are not programmed with unique instance numbers.
This means that the auto select feature can’t determine which engine is tted on the port and
which is tted on the starboard side.
Network Groups
It is also possible to group certain settings so they are duplicated across the network on
multiple displays. Display (ie backlighting), units, damping, and alarms can be grouped either
in ‘Default’ group, or groups ‘1’ through to ‘6’. If any of the settings require discrete control, set
it to ‘none’.
To Next Page
Loading...
Need help?
General
