EasyManuals Logo

Simrad RS40 User Manual

Simrad RS40
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
| 3
| RS40/RS40-B User Guide
and it is your responsibility to determine whether such a license is
required before operating the radio.
The frequencies used by this radio are reserved for Maritime use
only and those frequencies must be included on your Radio
Operator’s license.
A valid USER MMSI number must be entered into this radio before
DSC functions can be used. You must apply for an MMSI number
which is usually obtained from the same authority that issues the
radio operator’s license. Contact the appropriate licensing authority
in your country. If you’re unsure who to contact, consult your Simrad
dealer.
A valid ATIS ID number must be entered into this radio before ATIS
functions can be used. An ATIS ID number is issued by Ofcom when
you add one or more pieces of ATIS equipment to your Ship Radio
Licence.
Important information
This Simrad DSC VHF radio is designed to generate a digital maritime
distress call to facilitate search and rescue. To be effective as a
safety device, this radio must be used only within the geographic
range of a shore-based VHF marine Channel 70 distress and safety
watch system. The geographic range may vary but under normal
conditions is approximately 20 nautical miles.
This radio can be configured to operate in your region/country of
operation. The user can select the region/country of operation during
the initial setup of the radio. This is a once-only operation. Should you
require to change the region/country, consult your Simrad dealer.
Regulatory Compliance Statements
European Union
Navico declare under our sole responsibility that the RS40/RS40-B
and HS40 conforms with the requirements of Directive 2014/53/EU
(RED). All compliance documents are available from the products
section in the following website: www.navico-commercial.com
EU RF exposure compliance notice for Fixed Mount VHF
To be protected against all verified adverse effects, the separation
distance of at least 2.1 m must be maintained between the antenna
of the radio having max. 6 dBi antenna and all persons.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad RS40 and is the answer not in the manual?

Simrad RS40 Specifications

General IconGeneral
TypeVHF Marine Radio
DisplayLCD
AIS ReceiverYes
NMEA 2000Yes
Waterproof RatingIPX7
Output Power25W
NMEA 0183Yes
ModulationFM
Power Supply12V DC
DSCClass D
ChannelsInternational, US, Canadian
GPSBuilt-in
Frequency Range156.025 MHz to 162.025 MHz
Weight1.2 kg

Related product manuals