Simrad RS40 - Page 66

66 |
Specications | RS40/RS40-B User Guide
Adjacent CH selectivity: more than 70 db
Spurious response: more than 70 db
Intermodulation rejection: more than 68 db
Residual noise level: more than -40 db unsquelched
Audio output power: 2 W (with 8 ohm at 10% distortion)
4 W (with 4 ohm external speaker
BUILT-IN GPS RECEIVER
Receiving frequency: 1575.42 MHz
Tracking code: C/A code
Number of channels: 72 channels
Horizontal accuracy: <10 m
Position fixing time: Warm start: 30s, Cold start: 90s
Position update interval: 1 second typical
HAILER
Audio power out: 30 W @ 4 Ohms
AIS-RX
AIS receive function: Yes, dual receivers (receive only)
AIS-TX (CLASS-B)
Class: Class-B CS (CSTDMA)
AIS transmit function: Yes, single AIS transmitter
Frequency range: 161.500 to 162.025 MHz in 25 kHz
steps
Output power: 33 dbm ± 1.5 db
Channel bandwidth 25 kHz
Modulation modes: 25 kHz GMSK for AIS TX and RX
FrBit rate: 9600 b/s ± 50 ppm (GMSK)