Simrad ST90 - Verifying the Communication with the Course Gyro

44
442729/A
4OntheleftsideoftheInstallationdialogbox,selectSensorConguration.
aSelecttherelevantsensorintheSensorlist.
bMakesurethatthecorrectparametersareusedforsensorconguration.
5ClosetheInstallationdialogboxwithoutmakinganychanges.
6Observethetopbar.
7Makesurethattheinformationfromthesensorisdisplayed.
Ifnecessary,enabletheread-outintheDisplayOptionsdialogbox.
8Ifpossible,useanotherinstrumenttoverifythattheinformationprovidedbythe
ST90iscorrect.
9Fillintheresulttables.
Result
DatagramPortBaudrateTalkerID
Requirements
Results
Speeddataisprovidedanddisplayed.
Therelevantcommunicationparametersarerecorded.
Dateandsignature:
Verifyingthecommunicationwiththecourse
gyro
Inordertooperatecorrectly,theST90requiresinputfromacoursegyro.Thecurrent
headingisshownonthetopbarifyouhaveenabledthisintheDisplayOptionsdialog
box.Thecommunicationwiththesensoristested.
Prerequisites
TheST90isinstalledasspeciedintheST90Installationmanual.
•ThesensorisconnectedtoacommunicationportontheST90.Thesensorison
andinnormaloperation.
•Theinterfaceportissetupwiththecorrectcommunicationparameters.
•YouarefamiliarwithNMEAandotherrelevantdatagramformats.
•Youknowhowtosetuptheparametersforserialandlocalareanetwork(LAN)
communication.
SimradST90HarbourAcceptanceTest