EN– 13
DRAWING UP BOBBIN THREAD
1.
Raise the presser foot lifter.
2. Holding needle thread loosely with your
left hand, turn hand wheel toward you with
your right hand rst lowering the needle
and continuing until the needle comes to
its highest position.
NOTE: A quick way to pick up the bobbin thread
is, with straight stitch selected, touch and relea
-
se the reverse button.
Your machine will perform one down-up cycle
and stop with the needle up.
Always stopping with the needle “fully up” is
one of the features of your computer sewing
machine.
3. Lightly pull up the top thread, and pick up
bobbin thread, which will appear through
the needle plate slot.
4. Pull both top and bobbin threads together
toward the back of the machine under the
presser foot, leaving about 6“(15 cm) clear.
To Next Page
Loading...
