Singer 398054 - CONTROL PANEL AND STITCH SELECTION; Panel Overview and Pattern Selection

16 –EN
FUNCTIONS OF CONTROL PANEL
Needle position indicator
Presser foot indicator
LCD display
Stitch pattern number
Pattern selection button
Letter pattern mode button
T
win needle mode button
Twin needle mode
indication
Stitch length
Stitch width
Stitch length adjustment
button
Stitch width adjustment
button
Letter stitch mode
indicator
Pattern number reference guide Letter pattern number reference guide
Stitch pattern number
Presser foot
ondicator (B,
J, Z, H, O)
Letter pattern mode
While the button is pushed,
will
appear on the LCD screen. Press the or
. The number of the selected letter number
is displayed. The machine sews automatical-
ly one complete cycle of pattern string and
stops.
Twin needle mode
When using twin needles, push the twin needle mode button regardless of the
stitch you selected. Doing so will reduce the stitch width automatically and save
broken needles and possible damage to your machine.
When the button is pushed,
.
will appear on the LCD screen.
Patterns with circled numbers in the pattern reference guide cannot be selected
and a beep will sound.
PATTERN NUMBER SELECTION
BUTTONS
When the machine is turned on, straight stitch
is selected and pop-up screen for individu-
al preference settings appears on the LCD
display.
Press the
or side of to increase or de-
crease the number by one. Long press the
or side of to decrease or reduce the number
by ten.
NOTE: The presser foot to be used is indicated by the letter (B, J, Z, H, O) right to
the right if the stitch number
.