Singer 398054 - STITCH ADJUSTMENT AND LETTERING; Stitch Adjustments and Letter Spacing

EN– 17
STITCH LENGTH AND STITCH
WIDTH / NEEDLE POSITION
ADJUSTMENT BUTT
ONS
Your sewing machine will display your stitch
settings an Auto/Default stitch Length and
Width.
You can manually change the length, width or
needle position for straight stitch according to
your preference pushing manual adjustment
buttons.
When the stitch length or stitch width is
changed from the
default setting,
around or disappears
from the LCD. When the stitch length or stitch
width is reset back to the
default setting, reappears around or in the
LCD.
LETTER PATTERN NUMBER
SELECTION
While the button is pushed, A will be appeared
on the LCD screen and pattern “0” is selected.
The LCD screen will display the number of the
letter pattern you wish to stitch.
Press the
or side of to increase or
decrease the number x 1. Long press the or
side of to increase of decrease the number
x 10.
ADJUST THE SPACING
BETWEEN LETTERS
Your sewing machine will display your stitch
settings at an Auto/Default stitch Length and
Width.
You can manually change the spacing be-
tween letters according to your preference
pushing manual adjustment buttons.
When the spacing is changed from the default
setting
around disappears from the
LCD.
When the spacing is reset back to the default
setting, reappears around n the LCD.
The machine sews one cycle of the pattern
and stops.
Presser foot indicator (Z)
Letter pattern mode
indicator
Default stitch length
indicator
Stitch length
Manual adjustment
buttons for stitch
length
Letter pattern number
Letter pattern mode button
Default Spacing
indicator
Spacing between
letters
Manual adjustment
buttons for spacing
between letters
Stitch width/needle
position of straight
stitch
Default stitch width
indicator
Manual adjustment
buttons for stitch
width/needle position
Buttons for pattern number
selection