31
1. Position your fabric and button under
the presser foot. Lower presser foot.
Turn the hand wheel to make sure
needle clears both left and right
openings of button. Adjust width if
required. Sew 10 stitches.
2. If a button shank is required, place a
darning needle on top of the button and
sew over top of it as illustrated.
: Presser foot - All Purpose Foot
: Darning plate
Helpful Hint: To secure thread, pull
both threads to the backside of the
fabric and tie together.
SEWING ON A BUTTON
SETTINGS
90
To Next Page
Loading...
