39
You should always test the decorative
stitch on a scrap piece of fabric before
sewing it onto your nal project.
Before starting to sew, check that there
is enough thread wound onto the bobbin
to ensure that the thread will not run out
during sewing.
For best results, stabilize fabric with a tear-
away or wash-away stabilizer underneath
when stitching.
Helpful Hint: Bobbin thread should
not appear on the top side of the
fabric, so it may be necessary to
slightly lower the tension setting.
MORE DECORATIVE STITCHES & IDEAS FOR DECORATIVE
MACHINE STITCHING
: Presser foot - All Purpose Foot
: Thread tension control - 5 or -1
SETTINGS
To Next Page
Loading...
