Singer 6199 - Knowing Your Sewing Machine; Machine Setup and Initial Steps; Bobbin Winding and Case Handling; Automatic Needle Threader and Bobbin Pick-up

2
1. KNOWING YOUR SEWING MACHINE
Machine identication ------------------------- 3
Accessories ------------------------------------- 4
Setting up your machine --------------------- 5
Spool pins, Presser foot lifter --------------- 6
Darning plate ,
Converting to free-arm sewing ------------- 7
Winding the bobbin --------------------------- 8
Removing bobbin case from shuttle,
Inserting bobbin into bobbin case --------- 9
Inserting bobbin case into shuttle,
Threading the top thread --------------- 10-11
Using automatic needle threader ---------12
Picking up bobbin thread -------------------13
Needle, thread and fabric chart,
Changing the needle -------------------------14
Adjusting top thread tension ---------------15
Functions of control panel,
Straight stitch needle position ------- 16-17
Adjusting bobbin thread tension,
Changing presser foot -----------------------18
Helpful messages -----------------------------19
Reverse operation button ------------------20
2. STARTING TO SEW
Quick reference table of stitch length
and width ---------------------------------- 21-24
Straight stitching ------------------------- 25-26
Keeping seams straight
Hand-look quilt stitch -------------------------27
Inserting zippers and piping
Zigzag stitching --------------------------------28
Adjusting stitch width and length
TABLE OF CONTENTS
Multi-stitch zigzag, Shell stitch -------- 29-30
Satin stitch
,
Placement of patterns
Sewing on a button --------------------------- 31
Blindhem stitch -------------------------------- 32
Decorative and stretch stitches ------- 33-38
Straight stretch stitch,Honeycomb stitch,
Overedge stitch,Feather stitch,
Ric-rac stitch,Double overlock stitch,
Criss-cross stitch,Entredeux stitch,
Ladder stitch,Pin stitch, Blanket stitch,
Slant pin stitch,Slant overedge stitch,
Crossed stitch, Greek key stitch,
Fishbone stitch, Thorn stitch,
Reinforced overedge stitch,
Edge-joining stitch, Wizard stitch
More decorative stitches & ideas for
decorative machine stitching ---------------39
Buttonhole making ----------------------- 40-42
Automatic buttonhole, Corded buttonholes
Manual buttonhole ---------------------------- 42
3. CARING FOR YOUR MACHINE
Cleaning the feed dogs and
shuttle area -------------------------------- 43-44
4. OPTION ACCESSORIES
Large extension table,
Hard-sided cover -------------------------------45
5. PERFORMANCE CHECKLIST
----------------------------------------------- 46
6. SPECIAL ACCESSORIES
Roller foot, Button sewing foot ------------ 47
Blind stitch foot, Overcasting foot --------- 48
Invisible zipper foot --------------------------- 49
For European version
Dimensions: 376 mm × 197 mm × 301 mm
Mass of the equipment: 6.6 kg
Rated Voltage: 230 V ~
Rated Frequency: 50 Hz
Rated input: 65 W
Using ambient temperature: Normal temperature
Acoustic noise level: less than 70 db(A)