41
MarkFabric marking
5. Carefully mark the position of
buttonhole on your garment.
6. Place the fabric under the foot. Pull
out the bobbin thread underneath the
fabric to a length of about 4 inches to
the rear.
7. Align the buttonhole mark on the fabric
with the mark on the buttonhole foot,
and then lower the buttonhole foot.
8. While holding the top thread, start the
machine.
Buttonhole foot alignment position
1 2 3 4 5 6 7 8
1 2 3
4 5 6 7
Fabric marking
* Sewing will be completed automatically in the following order.
9. When sewing is finished, use a
buttonhole opener/seam ripper to
open up the fabric in the center of the
buttonhole.
Be careful not to cut any of the
stitching.
To Next Page
Loading...
