Singer CG-500 - Changing Snap-on Presser Feet; Change Snap-on Presser Feet Procedure; Changing Screw-on Presser Feet; Change Screw-on Presser Feet Procedure

81
A
Nettoyerlamachine
Votremachinevavousrendredenombreux
servicespendantdelonguesannées.Pour
garantirsonfonctionnement,consacrez
quelquesminutesàsonnettoyage.
Lessurfacesextérieurespeuventêtrenettoyées
avecdusavonetunchiffondoux.
Enlevezpelucheetpoussièreenbrossantà
l’aidedupinceau:
•Danslesguides-filsetleviers.
•Surlepiedpresseuretsabarre.
•Danslesupportdecanetteetsurlaplaqueà
aiguille.
Votremachinepeutêtreréviséepériodiquement
porvotremagasin.
12
Changingsnap-on
presserfeet(B),(E),
(J),(L)
YourmachinecomeswiththeGeneralPurpose
PresserFoot(B)alreadyattached.Youcan
easilychangetoanyoneoftheotherpresser
feet,whichsnapontoacommonshank,by
followingthedirectionsbelow.
•Raiseneedletoitshighestpositionbyturning
handwheeltowardyou.
•Raisepresserfootusingpresserfootlifterat
backofmachine.
•Pushtoeofpresserfoot(1)up,untilitsnaps
offtheshank(2).
•Removefootfrommachine.
•Placenewfootundercenterofshank.
•Lowerpresserfootlifter,fittingshankover
presserfootpin(3).
•Don’tturnscrew.Instead,pushpresserfoot
screw(4) downfirmlyuntilfootsnapsinto
place.
Changingscrew-on
presserfeet
Somespecialpresserfeetcanbepurchased
atyourretailerwhichhavebuilt-in
shanksthatcanbereplacedasfollows:
•Raiseneedleandpresserfoot.
•Loosenpresserfootscrew(1)andremove
presserfootwithshank(2),guidingittoward
youandtotheright.
•Toreplacepresserfootwithshank,hook
shankaroundthepresserbarandtighten
presserfootscrew.