Quantum
®
XL-6000
Multiple Hoop Embroidery
- 42 -
5. Use “left” Arrow Pictogram to move border to the left in 23 moves. Use
“up” Arrow Key to move border up, until bottom of the border touches the
X-axis on screen.
6. To check placement, touch
Pictogram. Touch zoom.
7. Touch the border where it meets the axis, to check placement.
8. Touch the Pictogram to access the Positioning Arrows. Use the
Arrow pictograms to move the border to line up on the X-axis line (allow
the image to slightly overlap the line, to allow for pull compensation
during embroidery).
9. Touch Pictogram and Zoom to return to full screen.
10. Touch to return to the Edit Screen.
11. Touch to combine with another border.
1. Select Border #3 again.
2. Touch Pictogram (border appears in center of screen).
3. Touch the Pictogram.
4. Touch the Rotate Pictogram.
5. Touch 100 degrees once, then press 10 degrees a total of 8 times, until the
angle of rotation displayed is 180 degrees.
6. Touch to register this change.
7. Touch to return to the Edit screen.
8. Touch Pictogram
x8
To Next Page
Loading...
