Singer Quantum XL-6000 - Page 46

Quantum
®
XL-6000
Multiple Hoop Embroidery
- 43 -
9. Touch Pictogram again.
10. Use “left” Arrow Pictogram to move design to the left, then the “down”
Arrow Pictogram to move design down. Borders should line up vertically
as one long border.
11. To check placement, touch the Pictogram. Touch zoom.
12. Touch location on screen where the borders meet, to check the placement.
13. Touch Pictogram to access Positioning Arrows and move border.
14. Touch and to return to full screen.
15. Touch to return to the Edit screen.
16. Touch to combine with another border.
1. Select Border #3 again.
2. Touch Pictogram (border appears in center of screen).
3. Touch Pictogram.
4. Touch
Pictogram.
5. Use “right” Arrow Key to move border to the right in 23 moves. Use “up”
Arrow Key to move border up, until bottom of the border touches the
X-axis on screen.
6. To check placement, touch Pictogram. Touch zoom.
7. Touch screen where border meets the X-axis line.
8. Touch Pictogram to activate Positioning Arrows and move border.
9. Touch and Zoom to return to full screen.
x8
x8