Singer Quantum XL-6000

To Next Page

To Previous Page

Quantum

XL-6000

Multiple Hoop Embroidery

- 44 -

10. Touch to return to the Edit screen.

11. Touch to combine with another border.

1. Select Border #3 again.

2. Touch Pictogram (border appears in center of screen).

3. Touch Pictogram.

4. Touch Rotate Pictogram.

5. Touch 100 degrees, then touch 10 degrees a total of 8 times, until the

angle of rotation displayed reads 180 degrees.

6. Touch to register this change.

7. Touch Pictogram to access Positioning Arrows and move border.

8. Use the arrow pictograms to position the border to line up vertically with

the upper border and meeting at the X-axis.

9. To check placement, touch Pictogram. Touch zoom.

10. Touch spot on screen where the borders meet, to check the placement.

11. Touch Pictogram to activate Positioning Arrows. Make the final

adjustments to the border placement.

12. Touch and Zoom to return to full screen.

13. Touch to return to the Edit screen.

14. Touch to select Multi-hoop End.

Singer Quantum XL-6000 - Page 47