SINO SDS2-2MS - Digital Filter Function (SDS2-2 G)

Move the machine tool to bring the
X-axis displayed value into 150.000,
and then move to bring the Y-axis displayed value into 100.000, so, the
processing of two peripheral sides finishes.
 Start the processing at the position
shown in Fig. (3)
Move the machine tool to bring the X-axis displayed value into -150.000
and then move to bring the Y-axis displayed value into -100.000, so, the
processing of two peripheral sides finishes.
5) You may key to quit the tool compensation at will.
L.
Digital Filter Function
( Be the same with: 2-2G )
SEL
SEL
SEL
SEL