Smooth R Arc Calculation function (ARC Function)
In the processing of moulds, it often happens that the processing of
circular arc is indispensable. For the case that the processing is arranged for a
single working piece, the required contour is simple and not too much
processing of circular arc will be involved, it may involve much dissipation in
both time and money to arrange the job to a digital control machine tool.
The advanced smooth R arc Calculation function provided in SDS2
model digital display box makes it possible to complete the processing of a
single piece such as moulding copper electrode easily and quickly with a
universal milling machine. This arc Calculation function makes it possible to
freely control the smoothness of the circular arc. The distance between two
adjoining working points is uniform, the smoothness of the circular arc can be
control through the control of this distance.
This function is used in the processing of circular arc.
The display on
the message window prompts the operator to enter all the parameters have to
be defined, so it is very easy to operate.
This function can based on the
input maximal cut (MAX CUT) calculates out the most proper depth of cut,
and so, the smoothness of the circular arc in thoroughly in the operator’s
control.
1) An operator without experience in this must at first get a clear
understanding of the coordinate system in using the Arc R calculating
function.
Note: The arrow direction is
the positive direction of
coordinate axes.
To Next Page
