SINO SDS2-2MS - Page 83

If the whole circle is divided by 7 point.
Key
Key , next step.
8) Enter processing
The display result for dividing the arc into
5 equal sections.
The display result for dividing the arc into
6 equal sections.
9) Key and the position of next processing point will be displayed, just
move the machine tool to bring the displayed values on both axes into zero
to reach the corresponding processing position.
10) You may quit PCD function at will, just key .
y
{
6
SEL
SEL
SEL
SEL
SEL
SEL
SEL
SEL
SEL