© Nov. 2020 1-2 GTTZ10EJ Operation Manual
MACHINE SPECIFICATIONS
Table 1-1 GTTZ10EJ Specifications (continued)
MEASURE
ML10EJ (METRIC) ML340EJ (IMPERIAL)
Drive mode (drive×steer)
2WD×2WS
Max allowable side force (indoor /
outdoor)
400N (indoor) / 200N (outdoor) 90N (indoor) / 45N (outdoor)
Max operating noise level
72 dB
POWER PARAMETERS
Hydraulic tank capacity
8 L
1.8 gal (imperial) / 2.1 gal (US)
Hydraulic system capacity (including
hydraulic tank)
13 L
2.9 gal (imperial) / 3.4 gal (US)
Hydraulic system pressure
15 MPa
2175 psi
Battery (number×voltage, capacity)
4×6V, 240Ah
System voltage
24VDC
Control voltage
24VDC
FLOOR LOADING INFORMATION
Max tire load
1200 kg
2646 lb
Pressure against ground
1180 KPa 171 Psi
ENVIRONMENT REQUIREMENT
Max allowable wind speed (indoor/
outdoor)
0 m / s (indoor) / 12.5 m / s (outdoor) 0 mph (indoor) / 28 mph (outdoor)
Max allowable altitude 1000 m 3281 ft
Allowable ambient temperature
(lead-acid battery)
-10℃～40℃ 14℉～104℉
Allowable ambient temperature (-
lithium battery)
-20℃～40℃ -4℉～104℉
Max allowable RH 90%
Storage environment
Stored at -20℃ to 50℃(-4℉ to 122℉) in a well-ventilated environment with
90% relative humidity (20℃ [68℉]), and away from rain, sun, corrosive
gas,inflammables and explosives.
WEIGHT
Gross weight (no load) 2678 kg
5904 lb
Note：
a) The working height adds 2m(6ft7in) of human height to platform height.
b) In different areas, hydraulic oil, engine oil, coolant, fuel and lubrication should be added in accordance with the
environmental temperature.
c) In cold weather, auxiliary devices are needed to start the machine.
To Next Page
Loading...
