Sinoboom GTTZ10EJ - Platform Controls Function Test

© Nov. 2020 6-4 GTTZ10EJ Operation Manual
PRE-OPERATION FUNCTION TEST
Turntabel rotate
1. Push the turntable rotate function button.
2. Simultaneously press and hold the enable button
and the up/rotate left control button,the turntable
should rotate left.
3. Simultaneously press and hold the enable button
and the down/rotate right control button,the
turntable should rotate right.
Jib boom up/down
1. Push the jib boom up/down function button.
2. Simultaneously press and hold the enable button
and the up/rotate left control button,the jib boom
should raise.
3. Simultaneously press and hold the enable button
and the down/rotate right control button,the jib
boom should lower.
PLATFORM CONTROLS
NOTICE
All the tests of platform controls should be completed
within a cycle.