© Nov. 2020 3-8 GTTZ10EJ Operation Manual
SAFETY
COLLISION HAZARDS
and location of personnel and any
other factors that may cause
collisions.
• Do not operate the machine on
any crane or overhead traveling
device unless the crane control is
locked or precautions have been
taken to prevent any potential
collision.
• Never operate a machine
dangerously or for fun.
CRUSH HAZARDS
A potential crush hazard exists during movement of the
machine. Always keep body parts and clothing a safe
distance from the machine during machine operation.
CRUSH HAZARDS
• Do not place your hands and arms
where they may become crushed
or trapped.
• Do not work under the platform or
the boom when the boom is not
protected by a crane.
• Maintain good judgment and
planning when using the
controller on the ground to
operate the machine. Maintain
proper distance between operator,
machine and fixed object.
EXPLOSION AND FIRE
HAZARDS
EXPLOSION AND FIRE HAZARDS
Do not use the machine or charge the
battery in hazardous or potentially
flammable or explosive atmospheres.
DAMAGED MACHINE
HAZARDS
NOTICE
To avoid machine damage, follow all operation and
maintenance requirements in this manual and the
Maintenance Manual.
UNSAFE OPERATION HAZARDS
• Do not use the machine if it is
damaged or not in proper operat-
ing condition.
• Thoroughly inspect and test for all
functions of the machine before
use. Immediately mark and stop
damaged or faulty machines.
• Ensure that all maintenance oper-
ations have been performed in ac-
cordance with this manual and the
corresponding Maintenance
Manual.
• Make sure all labels are in place
and are legible.
• Ensure that the Operation Manual
and Maintenance Manual are
sound, easy to read and stored in
the storage compartment on the
platform.
To Next Page
Loading...
