Sinocare Safe-Accu - Page 16

mmol/L
mmol/L
mmol/L
mmol/L
Viewing test result
After the blood glucose meter counts down
from 10, your blood glucose results appears
along with the unit of measure. This blood
glucose result is stored in the meter memory.
Turn the meter off by removing the Safe-Accu
test strip. Discard the used test strip carefully to
avoid contamination.
If test result is above 600mg/dL (33.3mmol/L),
the screen displays HI. Use a new test strip to
test again. If still display HI, please contact
healthcare professional immediately.
If test result is below 20 mg/dL (1.1mmol/L),
the screen displays LO. Use a new test strip to
test again. If still display LO, please contact
healthcare professional immediately.
28 29
mg/dL unit mmol/L unit
Attention: The test result of “HI” or “LO” will not store in memory.
Press the button “C” or “D” can view the averages of the 7-day, 14-day, 28-day of blood
glucose test results or other test results. Press and hold the button “M” for 3 seconds to
turn off the meter.