The Sinocare lancing device is prepared and ready to lance your finger for a blood sample.
The lancet is for single use only. To prevent the risk of blood borne pathogen transmission, it
shall not be shared with other people.
STEP 4: Twist and pull to remove the lancet
protector. Retain the lancet protector for safe
lancet disposal.
STEP 7: Pull the spring cover back to arm the
lancing
STEP 8: Take a strip out of the strip vial.
Immediately close the vial lid.
Attention: Finish test within 3 minutes after
take out strip. Otherwise test result may
be inaccurate.
STEP 9: Insert strip into the test strip port.
Tips: Insert a Safe-Accu blood glucose test strip
with the printed side facing up and gold contact
end toward the meter.
Attention: If blood is not applied within 3 minutes,
the meter will automatically turn off. Reinsert the
strip and begin test.
STEP 5: Screw the lancing device cover back on.
STEP 6: Twist the adjustable comfort tip to adjust
the puncture depth.
Tips:
1-2 (least depth) for soft or thin skin,
3-4 (average depth) for average skin,
5 (deepest depth) for thick or calloused skin.
24 25
To Next Page
Loading...
