Snug the tension screw. Depending
on the size, type, and condition of the reel,
you may wish to adjust the speed of the
spin motor or the carriage travel so that
you get a smooth, consistent grind.
The auto infeed will continue to feed
the grinding stone. Listen for uniform
grinding sound all the way across the reel.
When the counter has reached the total
count you selected, it will stop infeeding
and spark out. If the reel is not sharp you
may reset the counter for additional
passes. You also have full manual control
of the grinding stone infeed, even in full
auto mode.
To Next Page
Loading...
General