14
Home Installation
There are several parts to setting up your Home Kit. Follow these 4 steps for an
easy installation.
Step 1: Connect the Home Dock and Dock the Onyx Radio
When installing the Home Dock in your home, choose a location in close proximity
to your stereo system or powered speakers, and also where the cable from the
Indoor/Outdoor Home Antenna can reach the Home Dock. The location should
be easily accessible and provide good visibility of the display, but should not be
located where it will be in direct sunlight, which will affect the visibility of the
display screen.
A. Connect the Indoor/Outdoor Home Antenna
Once you have selected a location, connect the antenna to the silver ANT
connector at the rear of the Home Dock.
We will work on the location and
aiming of the antenna in the next
step.
ANTAUDIO POWER
To Next Page
Loading...
Need help?
General
