52
Demo Mode
Your Onyx has a demo mode that starts playing when, for a prolonged period of
time (more than 5 minutes), the Radio either detects it’s not connected to the
antenna, or the antenna stops receiving a signal. It disappears when the antenna is
connected properly or when the Radio starts receiving a signal. You can also exit
demo mode at any time, by pressing and holding the Select button for 10 seconds.
If desired, you can also manually put Onyx in demo mode.
The ability for Onyx to enter demo mode is enabled by default. If you don’t want
Onyx to ever enter the demo mode, you can disable the demo feature. You can
enable it again at another time if desired.
To enable or disable the demo mode:
1 Press menu.
2 Press
to scroll to and highlight
Demo Mode and press the Select
button.
3 Status will be highlighted. Press
the Select button to toggle the
setting between enabled or disabled.
(Repeatedly pressing the Select button
toggles between the choices.)
4 If you have selected disabled, press
and hold menu to return to the main display screen. If you have selected
enabled continue with step 5.
5 Press
to scroll to and highlight Enter Demo Mode and press the Select
button. The demo mode will start in 10 seconds.
Demo Mode
Status
Enter Demo Mode
enabled
Configuring Your Onyx
To Next Page
Loading...
Need help?
General
