64
Using Onyx With a Vehicle Dock
To turn the FM Transmitter On:
1 Press menu.
2 Press
to scroll to and highlight FM
Settings and press the Select button.
3 FM Transmitter will be highlighted.
Press the Select button to toggle the
setting from Off to On.
4 The FM Channels menu item will now
be accessible, allowing you to tune
Onyx and the FM radio in your vehicle to the same FM channel.
TIP! Onyx is programmed with FM channel 97.9 as the default setting.
To turn the FM Transmitter Off:
If you are using the older model Vehicle Dock from the Universal Xpress Car Kit,
and plan to use the Aux In Cable or a Cassette Adapter as the audio connection
option, you’ll have to turn the FM Transmitter under the FM Settings menu in
Onyx Off, if it was previously turned On.
1 Press menu.
2 Press
to scroll to and highlight FM
Settings and press the Select button.
3 FM Transmitter will be highlighted.
Press the Select button to toggle the
setting from On to Off.
4 A warning message will be displayed
advising you to connect the Aux In
FM Settings
FM Transmitter
FM Channels
on
FM Settings
FM Transmitter
FM Channels
off
To Next Page
Loading...
Need help?
General
