63
If you are connecting the audio through your vehicle’s FM radio (SureConnect
or FMDA):
1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 65, and
disable AUX Detect.
2 Turn the FM Transmitter in Onyx On. Refer to “Turn FM Transmitter On/
Off” on page 63, and turn the FM Transmitter On.
3 Continue with the installation.
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1 Disable the AUX Detect feature. Refer to “AUX Detect” on page 65, and
disable AUX Detect.
TIP! The FM Transmitter must be Off. To verify that the FM Transmitter is Off,
refer to “Turn FM Transmitter On/Off” on page 63.
2 Continue with the installation.
Turn FM Transmitter On/Off
Turning the FM Transmitter On applies only if you are
using the older model Vehicle Dock from the Universal
Xpress Car Kit, and plan to use SureConnect or FMDA as
the audio connection option.
You’ll have to turn On the FM Transmitter under the FM
Settings menu. However, before you can access the FM
Settings menu, you first need to disable AUX Detect.
Refer to “AUX Detect” on page 65. Once you have disabled
AUX Detect, the FM Settings menu will be accessible.
Audio enabled through
auxiliary line. FM turned OFF.
AUX Connected
To Next Page
Loading...
Need help?
General
