30
Direct Tune
A channel can be tuned directly by entering the channel number using the
number buttons.
1 To directly tune to a channel press
direct.
2 Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to
the channel.
Jump
Depending upon how you configure the mode, pressing jump will either go to the
last channel to which you were listening, or go to the traffic and weather channel
for the city of your choice which you select from a list of the 22 most congested
cities.
TIP! By default jump is configured to tune to a traffic/weather channel. To select
a city for traffic and weather, or to configure jump to tune to the last channel to
which you were listening, refer to “Jump Settings” on page 47.
Return to Main Display Screen
Pressing and holding menu in most instances will return you to the main display
screen. In some cases, you may need to follow the instructions on the display
screen.
Using Your Onyx
Direct Tune
Enter channel #
5 1 _
To Next Page
Loading...
Need help?
General
