66
Using Onyx With a Vehicle Dock
2 Press to scroll to and highlight Factory Settings and press the Select
button.
3 AUX Detect should be highlighted and show as enabled. Press the Select
button to toggle the setting.
4 A warning screen will be displayed.
Press the Select button to confirm that
you want to disable AUX Detect.
5 If you want to cancel press menu to
return to Factory Settings. AUX Detect
will remain enabled.
6 AUX Detect will show as disabled.
Press and hold menu to return to the
main display screen.
To enable AUX Detect
(Do this when the Radio is transferred to the PowerConnect Vehicle Dock from an
older model Vehicle Dock.)
1 Press menu.
2 Press
to scroll to and highlight Factory Settings and press the Select
button.
3 AUX Detect will be highlighted and show as disabled. Press the Select
button again to toggle the setting to enabled.
4 Press and hold menu to return to the main display screen.
Disable only if using vehicle dock
from Universal Xpress Car Kit.
Otherwise, leave it enabled.
Disable AUX Detect?
or menu to cancel
Press Select to confirm
To Next Page
Loading...
Need help?
General
