7.1.3 Configuration – System
- System Setting: In this field, you can configure
the basic information of your camera.
• Camera Name: This field is used to enter a
descriptive name for the device. The default
setting for the Camera Name is CS-xxxxxx,
where xxxxxx is the last six digit of the MAC
Address. The maximum length is 32 (printable
ASCII).
• Location: This field is used to enter a
descriptive name for the location used by the
camera (optional).
• Admin: This field is used to enter the
administrator name along with the password to
access the System Administration settings. Be
sure to enter the password twice to confirm the
details once in the Admin Password field and
again in the Confirm Password field.
The default setting for administrator is blank
space (Null String), and you need to key in the
administrator name with a maximum length of
13
To Next Page
Loading...
