82
E Xplug Control Installation
Installation To Web Server
Important Information
It is highly recommended to install the Xplug
Control application to the Web Server for IE 5.0. It
must be installed to a Public Domain with Fixed IP
address.
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select
“System” and under the “Loading ActiveX From”
input web server location
(http://www.web server location.com/
).
Once the settings are completed, the user now is able to
access the Internet Camera from the web browser by
selecting the image view – ActiveX mode.
Installation on Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the
auto-run program. Once completed, a menu screen will
appear as below:
To Next Page
Loading...
