Need help?Do you have a question about the Sitecom LN-402 and is the answer not in the manual?
Explains how to access the camera's settings via the 'Configuration' option.
Details how to configure basic system information like camera name and admin credentials.
Covers settings for video resolution, compression, frame rate, brightness, contrast, and saturation.
Details settings for wireless connection mode, SSID, channel, and WEP encryption.
Explains IP address modes, DNS settings, and port configurations.
Details how to manage user access, define users, and set upload/email privileges.
Restores all camera settings to their factory default values.
Guides the user on how to update the camera's firmware by selecting a firmware file.
Guides the user through the installation process of the IPView SE application.
Guides the user on how to update the camera's firmware by selecting a firmware file.
Explains how to access the camera's settings via the 'Configuration' option.
Details how to configure basic system information like camera name and admin credentials.
Covers settings for video resolution, compression, frame rate, brightness, contrast, and saturation.
Details settings for wireless connection mode, SSID, channel, and WEP encryption.
Explains IP address modes, DNS settings, and port configurations.
Details how to manage user access, define users, and set upload/email privileges.
Restores all camera settings to their factory default values.
Guides the user on how to update the camera's firmware by selecting a firmware file.
Guides the user through the installation process of the IPView SE application.
Guides the user on how to update the camera's firmware by selecting a firmware file.
General| Model | LN-402 |
|---|---|
| Category | IP Camera |
| Motion Detection | Yes |
| Audio | No |
| Power Supply | 5V DC |
| Connectivity | Ethernet, Wireless |
| Protocols | TCP/IP, HTTP, SMTP, FTP, DHCP, DDNS, UPnP |
| Resolution | 640x480 pixels |
To Next Page
