22
• IP Address – 192.168.0.20
• Subnet Mask – 255.255.255.0
• Default Gateway – 0.0.0.0
Dynamic Address (DHCP) – If your network
uses the DHCP server, select this option.
According to this setting, the camera will be
assigned an IP address from the DHCP server
automatically. Every time when the camera
starts up, please make sure that the DHCP
server is set to assign a static IP address to
your camera.
PPPoE – If your application requires a direct
connection from an ADSL modem through the
camera’s RJ-45 LAN port, click this option and
enter the User ID and Password into the
respective boxes. (You should have an ISP
PPPoE account.) The camera will get an IP
address from the ISP as starting up.
• DNS IP Address: DNS (Domain Name
System) server is an Internet service that
translates domain names into IP addresses.
Enter at least one DNS IP Address in this field.
• Dynamic DNS: The Dynamic DNS service
allows you to alias a dynamic IP address to a
static hostname in any of the domains, allowing
your computer to be more easily accessed from
various locations on the Internet.
• Second HTTP Port: The default port for
communication is via port 80, and you can
change it according to your network
configuration. Select Enable from the option
and enter the desired port number in the
following box.
To Next Page
Loading...
