Page 50
EN
4. Assembly/Connection
4. Assembly
KFGS
KFG
KFGC
4.1 Information on assembly
The assembly procedure for KFG grease lubri-
cation pump units is described in detail in the
assembly instructions associated with these
operating instructions. Information/instruc-
tions about assembling the KFG (S) (C) grease
lubrication pump units beyond the scope of the
assembly instructions are contained later in
this chapter.
4.2 Assembly procedure for KFG (S) (C)
pump units
Assembly must be performed in accordance
with the included assembly instructions
and the additional information/instructions
contained in this chapter.
Warning!
The applicable national environmental
regulations and statutes are to be ad-
hered to when dismantling and dispos-
ing of the multiline pump unit.
The product can also be returned to
SKF Lubrication Systems Germany
GmbH for disposal, in which case the
customer is responsible for reimbursing
the costs incurred.
4.3 Dismantling and disposal
To Next Page
Loading...
Need help?
General
